LG Error Code 106: How to Fix it

LG error code 106 will prevent you from connecting to the Internet on your smart TV. This is a major issue since you won’t be able to view any online content or access any online services.

However, it’s relatively simple to fix this error, and in today’s guide, we’re going to show you how to fix it and get back to your favorite streaming services.

Why won’t my LG TV connect to Wi-Fi anymore?

• Temporary glitches on your TV can cause this problem.
• Certain settings, such as Quick Start, can cause this problem.
• Internet connectivity issues, such as incorrectly configured network settings, issues with DNS settings, or in some rare cases problems with Internet Service Provider.
• Your Wi-Fi module is broken, thus causing an unstable Internet connection.

How do I fix error code 106 on my LG TV?

1. Try power cycling your TV

1. Press and hold the Power button on the remote control for 10 seconds to turn the LG Smart TV off.
2. When the TV is off, disconnect the power cord from the power source.
3. Keep it disconnected for about a minute or so.
4. Connect it to the power outlet and turn the TV back on.
5. After you complete the power cycle, open Quick Settings.
6. Next, select Network.
   
7. Choose a Wi-Fi connection.
   
8. Select your network on the list and enter its password and the Internet connection will be established.

2. Change the country in your settings

1. Press the Settings button on the remote.
2. Navigate to General settings.
    
3. Next, choose Location.
   
4. Now select LG Services Country.
   
5. Select a different region such as the US or Canada.
   
6. Confirm the changes and restart your TV.
7. Try to establish a WiFi connection again and check if the error message still appears.

3. Enable Live Plus

1. On your TV, go to the Settings menu.
2. Next, navigate to General and choose Additional settings.
    
3. Disable Quick Start +.
   
4. Lastly, go ahead and turn on Live Plus.

4. Reset TV to factory settings

1. Press the Settings button on the remote.
2. Navigate to All settings.
    
3. Next, select General and then System.
   
4. After that, select Reset to Initial Settings.
   
5. Select OK to confirm.
   
6. This will reset all your settings, remove all data, and fix any network connectivity issues.

LG TV WiFi error code 106 is usually caused by your settings, so you just need to adjust or reset them to fix the problem. In the worst-case scenario, your Wi-Fi module might be damaged, so you might need to contact the repair service. Alternatively, can use a wired connection as a temporary workaround.

While LG has some great devices, they aren’t without issues, and many reported that LG monitor is not detected on Windows. Other brands have similar problems, and many Windows users reported that they couldn’t connect their device to Samsung TV.

This isn’t the only issue you can experience with your TV, and many reported that their 4K TV is blurry, but we already tackled this issue.

Did you ever experience LG TV network connection problems and how did you fix them? Let us know in the comments below!